Home ADS 1

Dishtv reboot error and epg loading error solved.

Hii friends! 
Today I am going to give you some solutions about dishtv hd reboot error or continuous epg loading error. Sometimes you see that when you start your dish tv set top box it gets rebooting again and again and everytime it loads epg guide. This process is continuous and your box is not booting up. I am going to give you a simple trick through which you can troubleshoot this problem in minutes. Just follow these steps which are very simple and you can solve this issue at your home without having any skills.

Follow the Steps:

  • First start your dish tv set top box & wait for sometime until your box get rebooting. 
  • Power off and on your set top box again and press menu button of stb remote continuously until you got installation menu. 


  • Select forced software update option and press ok button. Initialise forced software update option. Wait till it gets completed. 

  • Restart your dish tv set top box and you will see that your problem is solved!!! Enjoy!!
Thank you visiting this portal. I am waiting for your comments!!!!

48 Comments

  1. Thank u so much for ur information. it was very much helpful for us to solve the issue

    ReplyDelete
  2. After pressing ok button a window open that showing forced epg upgrade and forced firmware upgrade ...after pressing ok button in both option ....a error msg is showin in both options ...

    ReplyDelete
    Replies
    1. I am using Asia sat only and the freq in on NSS please help how to do

      Delete
    2. You can not update since OTA update is available only through Dish TV NSS6 satellite at 95E

      Delete
  3. is it necessary to wait till signal strength and signal quality reach 999-100%..before pressing ok button ?

    ReplyDelete
  4. software upgrade is possible only at 12688 only or we can use another frequency for software upgrade? anybody have software to do it manually?

    ReplyDelete
  5. My set box signal strength & Quality 0%, where as another set box connected its working, what hapend my set up box. pl let me know

    ReplyDelete
  6. My set up box signal strength and quality shows 0%, where as another set box connected its working, what is the problem with my setup box

    ReplyDelete
  7. My set up box signal strength and quality shows 0%, where as another set box connected its working, what is the problem with my setup box

    ReplyDelete
  8. Does NOT work...I have same frequency shown in the screenshot & good signal quality...Still I always get error message when trying to upgrade firmware...

    ReplyDelete
  9. 303 EPG ERROR.....HELP NEEDED....

    ReplyDelete
  10. 303 EPG ERROR.....HELP NEEDED....

    ReplyDelete
    Replies
    1. Try to reload the EPG using Factory Setting.. IF not works then update your software..

      Delete
  11. My dishtv vc no.01520812127 and menu button press ok booting....plese wait!not start

    ReplyDelete
  12. Thanks Ishan Krishna Vatsa,

    You saved my time, appreciate your efforts.

    ReplyDelete
  13. Uprade krne k bad bhi problem solve nhi hui

    ReplyDelete
  14. Thanks a lot Ishan. It worked out the way you said.

    ReplyDelete
  15. I am not receiving sound when i switch on my dish tv .the volume of both my tv and dish tv set top box is maximum. i am able to resolve this problem after i switch off the set top box from main power and then switch it on. I have done software upgrade thrice but still the prblem persists .the problem is very frequent .if on start the sound comes then it will work fine.but sometimes when i start if the sound does not come then i have to restart it again .
    Please help.
    Another thing i am unable to do a factory data reset of my dish tv set top box .
    9910629209 please whatsapp any solution or post here.

    ReplyDelete
    Replies
    1. kindly check the connecting audio cable.. otherwise I think you have problem with your set top box hardware.

      Delete
  16. am getting black screen but dishtv logo gets displayed in rightmost corner of the bottom. when I try to change the channel, only channel numbers gets displayed but no channel names..

    ReplyDelete
  17. awaiting your urgent reply, many thanks in advance.

    ReplyDelete
  18. Hi... I did factory forced software upgrade d but the signal strength increasing n again decreasing hopping the same again n again. Please let me know further

    ReplyDelete
  19. Hi, please guide me, epg list was not happening and it showed error 301 signal not found. Then i pressed menu and by mistake i pressed the option erase epg..
    And it showed epg is erased..
    Now again i switched it off and tried to start it but its showing no signal.. its showing 0% signal and a weird continous beep is coming.. what to do ?

    ReplyDelete
    Replies
    1. I went to the terrace and also moved the antenna a lil but but still there is no signal. What to do ?
      Does epg erase means the channel list is gone or what ? What does it mean ? And what should i do to bring it back to normal ?

      Delete
    2. You have to align your dish in the correct direct. There is nothing but signal issue. After alignment of your dish antena restart your stb and it will do automatically the rest..

      Delete
  20. I have also same problem regarding the softwares upgrade. I have found signal In fq 11090 but upgrade fail. why.should I contact server

    ReplyDelete
  21. This comment has been removed by the author.

    ReplyDelete
  22. Hi. my setup box is still not loading, with sometime how much time did you mean, i have waited approx 1 hour .. but still it goes on circling, any idea what i can do.

    ReplyDelete
  23. When i switch on my dish tv set box it show software updates in progress don't switch off the power But software not updating it show signal not found and it reboot nothing go on Same mssg repeating. Could please advice how to update the software.

    ReplyDelete
  24. I too have the same issue as reported above...software is not updating and keep on restarting.i switched on the dish box for many days and the response is the same..... Fedup with their software updates....

    ReplyDelete
  25. How do i know that forced software upgrade is completed.....signal and quality are going up and down between 60 to 70....do i need to keep this open?

    ReplyDelete
  26. How do i know that forced software upgrade is completed.....signal and quality are going up and down between 60 to 70....do i need to keep this open?

    ReplyDelete
  27. I too have the same issue as reported above...software is not updating and keep on restarting.i switched on the dish box for many days and the response is the same..... Fedup with their software updates....

    ReplyDelete
  28. Hi, my dish tv stb updated its softwares automatically after I turned it on after a month. Since the updation, every channel posts a message that channel is not subscribed. My account is valid till 2017 june and I was viewing the channels earlier to my vacation.
    Can someone help?

    ReplyDelete
  29. Hi My dish tv HD setup box frequently rebooting or sometimes channels are freezing?any solution?

    ReplyDelete
  30. i will do the same but still same error occurred when software upgrade

    ReplyDelete
  31. Hi my setup box MBSC 208 dishtv , a.c. power has got down during the setup box forced software upgrade and when the power resumed, I switched on the setup box but getting error of the "An error occurred during software upgrade press OK to check the transponder or Cancel to exit" the signal level is around 70 % but still not getting booted UP. If any of you come across such issue pl help me out.

    ReplyDelete
  32. I am getting Loading Please wait screen and after that its reboots and again its showing loading please wait screen. Please help me on the same.

    ReplyDelete
  33. How do i disable parental control in my dishtv

    ReplyDelete
  34. Thanks for solving this problem, my company's tv had the same issue and nobody could fix it! Thank god our system, provided by microsoft dynamics partner, works smoothly enough :)
    All the best!

    ReplyDelete

Post a Comment

Previous Post Next Post
Home ADS 2